funny pillow cases How to Install Wood Stairs pillow covers farmhouse

Y'all–;I haven't been this excited about a project in a LONG time! If you follow my blog regularly, you already read this post about our plan for anawesome DIY staircase renovation using the NuStair system. Well folks, the project isnow completely finishedand it was even easier than I expected it to be. The full reveal will be coming later this week, so stay tuned!

But, let me share with you what I learned abouthow to install wood stairs and how our installation went. Remember, this is what we started with. Boring, beige carpet.

personalized gifts for him for birthday

I am not even going to attempt to provide a detailed tutorial on how to install new stair treads with the NuStair system because for once, I DON'T HAVE TO! The NuStair instructions and videos cannot be improved upon. The installation instructions are idiot prooffunny pillow cases, especially if you read them and watch this video.

Plus, all of the materials you need,even the adhesive, are shipped directly to you. Seriously, this DIY project moved smoother than ANY of our projects in recent history. I believed the system would work well and would be beautiful, but I honestly did not expect that it would be as simple as it was. We had 95%work done in one weekend. ONE WEEKEND. Really, in 1 1/2 days. It was awesome.

We started by ripping out the old carpet and carpet pad. That part wasn't bad. Removing the tack strips and staples was a lot less fun, but it moved relatively quickly. The entire “;demo”; step took about 4 man hours.

Next up was a whole lot of staining. You can order prefinished treads–;NuStair carries a large variety of colors and species including Red Oak, White Oak, Maple, Hickory, Walnut, Brazilian Cherry, American Cherry. You can check out all of the stair tread colors and species here. We choseunfinished Red Oak so that we can stain it ourselves to match the laminate flooring we have been replacing the carpeting with. So, after custom mixing a stain to match our laminate floors, we stained, and stained, and stained. Fortunately, we only had to apply one coat of stain. It dried quickly and we were able to put a coat of water-based polyurethane on before we went to bed that same night.

We also painted the stair risers. They come primed, which is awesome! We opted for black stair risers, which required a couple of coats for good coverage, but it moved really quickly. It took about 4hours to do all the staining/top coating and painting, with both Joe and me working on it.

We let the stain/polyand paint dry overnight and got to work installing the stair treads and risers the next day. It really could not be more simple. NuStair provides something called a“NuScribe,”; which acts like a slide ruler and can be positioned on top of each step, with the edges fitting tightly against the the stair stringers. Once you have a snug fit, youlock down the arms and then remove it from the stair. Then you position it on the NuStair tread, make your marks and your cuts and install it. The NuScribe looks like this:

The basic installation process is this:

And here is a fun animated image so you can see our progress, step-by-step! We completed the entire installation in 1 day! We started around 9:30 am and were done with the last step before dinner. Not bad at all. Frankly, it's one of the easier DIY projects we have tackled, which was SHOCKING to both of us!

After the stairs were installed, we had a small amount of touch up painting and caulking to do. We are finally all done and it looks GORGEOUS! But this was such a LONG post, I can't share the reveal with you now. Be sure to check back tomorrow to see all THE BIG REVEAL! I'll give you a hint–;we added a gallery wall and a little detail to the stair risers :)

I was not financially compensated for this post. I received free product from NuStairto complete my project. The opinions are completely my own based on my AMAZING experience with the NuStair system!

Now we have stairs we love! Before you head out and get started, be sure to check out my FREE design guides that will help you help you design spaces you absolutely love! Subscribe now and you will receive a password so that you can access everything in one convenient digital library.

Design by Matthew Quinn; Produced by Samantha Emmerling; Photography by Trevor Tondro

Interior designer Miles Redd is no stranger to pattern and color, so when we saw his designs for the rooms in our Winter 2018 collection, we couldn’t wait to sit down and talk to him about his inspiration. Being the design buff he is, it figures that so many of the spaces were inspired by design legends of the past. Learn all about the latest products in his collection, his favorite color pairings, and even his favorite finishing touches for a room.

Are you easily overwhelmed by the number of possibilities when it comes to machine embroidery and how to hoop the project? Thankfully, most embroidery designs come with some instructions that include recommendations for these things, but if they don’t, here are my top three ways to hoop. In addition to hooping the project, careful consideration of stabilizers will make your project a slam dunk.